Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5
Transceiver wg. M0NKA
Artur,
Strasznie drogo.


Pojawiła się wersja 187, która rozwiązuje kilka problemów.


- The bug in which there was a disruption when the STEP+ and/or STEP- button was pressed is now fixed. There is no need to remove the capacitor(s). (Please put them back to protect against RFI/static if you removed them!)
- A minor bug in the volume control in which two of the volume settings were the same is fixed.
- Problems with the audio un-muting in CW mode after TX have been fixed (mostly.)
- RX Phase adjustment has been added.
- TX Phase adjustment has been added - but it has effect ONLY in SSB mode!
- The TX/RX calibration settings now actively change with TX/RX mode, and the TX Phase adjustment is only possible in USB or LSB mode where it has an effect!
- The CW TX and RX frequencies are now aligned with each other, and they fall within the center of the 300Hz and 500 Hz wide CW filters. (Sidetone/offset is 750 Hz - fixed, at the moment.)
- The problem with very poor opposite sideband rejection on TX has now been fixed!



Więcej szczegółów:
https://uk.groups.yahoo.com/neo/groups/M...ssages/250

Pozdrawiam


Załączone pliki
.zip   mchf_firm_0_187_ka7oei_20140927.zip (Rozmiar: 69.24 KB / Pobrań: 969)
Odpowiedz


Wiadomości w tym wątku
Transceiver wg. M0NKA - przez SQ7GVU - 07-04-2014, 19:41

Skocz do:


Użytkownicy przeglądający ten wątek: 1 gości